Anti-glare films & Sun-blocking films (Reflective sunglasses effect)
Anti-glare films for internal use – Opaque white
Anti-glare films for external use and plasstic materials – Opaque white
Satinator anti-glare films – Interior and Exterior
Anti-glare films – Silver opal
Opaque bronze anti-glare films
Anti-glare films silver gray
Anti-glare films BlackOut
Anti-glare films INS 05 XSR super dark
Anti-glare films INS 15 XSR dark
Anti-glare films GT 8 EX – Exterior
Anti-glare films BlackOut white 2-layered
Frequently asked questions
Anti-glare film will reduce the sun radiation to a tolerable level, thus reducing sun glare and room heat at the same time. Therefore anti-glare film is often used on windows with high solar radiation. The stronger the anti-glare film, the stronger the glare reduction and the less glare of the sun will come through (similar to sunglasses).
The durability of an anti-glare film depends on inside and outside, as well as vertical or horizontal installation. Depending on the film type, our minimum warranty will be between 3 and 10 years.
Anti-glare film has an adhesive side on the back, which is covered with a transparent cover film. It must be removed before assembly and then both film and window must be sprayed with plenty of assembly concentrate-water mixture. Then the film is applied to the wet glass pane and after that, the assembly liquid must be completely scraped out.
In order to remove anti-glare film, heat the foil with a hair-dryer. Then pull the foil from one of its corners. You can pull it longitudinally easily. After the old foil has been removed, spray Ajax window cleaner on the window in order to remove the residuaries of the adhesive material. The remaining residuaries can also be removed with the help of a shaving razor or a glass scraper after a short time.